Sewage Push-fit Pipe & Fittings

-Ease and speed of installation and performance is available due to the socket in push fit system and no need for adhesive joints, welding and the like. Reduce administrative costs; turn this system to the most economical choice for the sewage piping system.
-Very simple and low-cost replacing parts of the plumbing system that needs to be changed (it is enough connection or connections to be replaced with new connections without the need for cutting, gluing or welding).
- Impose additional loads to the building due to the light weight and no need to strengthen of the acceptor parts of building load.
- Stable and reliable sealing, even in terms of subsidence of building and non-destructive vibration due to the physical characteristics of the system components.
-Having completely smooth inner surfaces and no extra appendages in the flow path leading to the elimination of the possibility of clogging and blockage of ducts and educed maintenance and repair costs.
-Longitudinal changes caused by temperature in this type of pipe and fitting is very low and equal to 0.11 mm per degree of temperature change.
- Bearing strike, mechanical stress, thermal and chemicals.
-In pipe and fittings of push fit system against all kinds made of polyethylene, never will not be seen cracks which caused by long-term stress (Stress cracking)
-This type of wastewater system is used for application at temperatures up to 90 ° C
- Compatible with all standard old sewage pipes and fittings, including plastic and alloys

-Very useful and long life due to using of the finest raw materials, connections and sealing rings
-Sealing rings used in push fit Yazd are the best type in the world with eternal life (guaranteed 100 years old)
-High-grade raw materials and hot water resistant, stable to light, the inclusion of environmental criteria and in accordance with the standard DIN 19560 and DINEN 1451
-Resistant against inorganic salts, solvents, corrosive, inorganic acids Simple and flexible implementation due to the various dimensions of length and diameter pipe and fitting (diameter 50 to 160 mm - Length 150 to 6000 mm)
-Design and construction of tools and equipment for easy and safe to install and run process
- testing as sealing that test sealing and sewage plumbing system in the worst possible conditions
-Use the most advanced machinery and molds for the production of pipes and fittings comply with the standard DIN 19560, as a result wall pipe never has been thinner in section relevant to the ring and are entirely consistent with the above standard.